SAW2

Welding Consumables
SAW [Flux & Wire Combination]


  • S-707T × H-14
  • Type : Neutral
  • Industry :
  • AWS : A5.17/ASME SFA5.17 F7A(P)6-EH14
  • JIS : Z3183 S502-H
  • EN : ISO 14174 S A AB 1 / 14171 S4

Applications

Single-layer welding of shipbuildings.

Characteristics on Usage

As the penetration is deep, it is suitable for welding of thick plate in both side single-layer welding.
It is suitable for single-pass-on-both-sides welding due to wide range of applicable welding conditions. Good bead appearance and excellent impact value of the weld metal.
As the consumption of flux is low, it is very economical.

Notes on Usage

① Dry the flux at 300~350°C (572~662°F ) for 60 minutes before use.
② When the flux height is excessive, poor bead appearance may occur.
③ Use welding current and speed as low as possible at the first layer of groove to avoid cracking